Hunter's Blog

Sharing & Reflecting on Learning

Category: Uncategorized (page 2 of 5)

Shotlists and story boards

Shotlists and story

I did this clinic With Ms Williamson.

Audio booths

Audio booths

These are some rules about the audio booths and i did this clinic with Mr Galluccio.

 

point and shoot cameras

point and shoot cameras

This topic has 6 rules. the rule of thirds, balance elements, leading lines, view point, background,framing. All these rules when you take different photos will make it look better. I  did this clinic with Ms Williamson

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

this is the the rule of thirds  you line the object and it has to  be in line with the lines.

 

 

presenting your piece to camera


In these next next few weeks we will be doing 10 to 11 film school clinics  we all have to make  a vlog for every clinic to pass and get a director hat. I  did this clinic with Mr Galluccio.

   Presenting your piece to  camera

 

This topic is about what to do when you on camera   and what to do off the camera  like breathing exercises    and  you always have to have you eye line to camera.

Turtle art

our class is still doing our 3D printing project but we a have switched our coding website to a non 3  demolition. we are now using a coding app called  turtle art.

our first task was just to play around with it see what i does  what all the buttons are

then our second task was  to make the coolest design you can this is some of mine  i made.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

these are all the designs  i made. this is every thing i did on turtle  art.  

beetle blocks project

We have started a new project 3D printing the our class is using a block based code  website witch is called beet blocks and we have to make different shapes before we can 3D print our final product.

our first task was to make a polygon. i made a 12 sided polygon. on the right is the shape i made and on the left is the code as you can see the fist block is when flag clicked. then it start   extruding means start drawing.

 

this was our second task we had to make a hexagon  with holes in it. on the left side is my code and on the right side is my shape

 

 

 

 

 

this is my code for the 3 task witch there are 4 different colours we had to stack up  4 hexagons in mine i stacked  them small to tall.

parts purposes and complexities

for the next three weeks  we are going to be pulling a part an object  and up cycling it so we can use it for something again. this photo was the first  part our project we had to write down objects around our school system then people in our school system like teacher and students. then we had to  do interactions so what parts of the things interact together.

 

 

 

 

 

 

for the project this term i am going to pull apart a Ferrari this is bottom of and the top labelled parts   and purposes of it.

 

 

 

 

this is the start of the pulling apart process this is when i just opened  it up  in this photo there is a mother board witch runs all the  code. The cords coming off  is connecting  to the different parts in the car. the white box at the back gives power to the whole   so it can drive.

 

 

 

 

 

 

 

this thing i found it hard to now what this  was it was a little battery  with cords connect to  2 wheels.

 

 

 

these screw  came out of the car. some of the screws that were really hard to get out so i had to  smash things so will get them open.

 

 

 

 

 

this is the the bottom of the car inside.

 

 

 

these things make the wheels spin.

this was inside the white  box

this is whats left of the car inside and on top every thing is gone inside this is whats left from the outside.

 

 

 

 

this is the deign up cycling  witch i am doing a party car witch has led lights in it and music playing

 

 

 

 

this is the code for the makey maky    sounds for the upcyling

 

 

 

 

 

 

 

 

sphero project

this term phoenix and i will working on sphero. our aim is to learn how to code it with block based code and java script. then later we will do projects.

this is some code from the hot potato

mini golf project

This is my design a single mini golf putting hole project.  In this project we are using  a Hummingbird  circuit board and a EV3 robot.  The course starts with a loop to loop obstacle, which  then leads  to a wind mill, goes through the windmill and  comes out the other side towards the putting hole.  The groups main goal is to create a single mini golf hole that utilises EV3 robot and hummingbird. The EV3 robot is  used the for the windmill which will be using a motor to make it spin around. The hummingbird is for the loop to loop obstacle, where  we will be using a vibration motor to make it vibrate through the pipe.

 

 

 

 

 

 

 

 

 

 

 

We started the  construction today and completed  the first stage out of  four. The first stage is the base of the putting  green where you hit off. The base was constructed using wood and nails and then we glued the fake grass on the top of the wood base. Stage two of the the construction we had to glue down the loop loop pipe to the base.  The hardest part of the construction so far,  has been trying to secure the pipe as its not very stable.  That is all our construction so far, the next part of the construction is the wind mill and the putting hole at the end.

 

this is our windmill that we are using for our mini golf hole. it will go before  the pipe it is made out of Lego and this is the code. its only small bit of code but it works.

 

 

 

we have started our stage 3 construction. this is our start this morning.  still more  to build  later  today.  this  is our out come at the end of the day. so in this video  it shows how our mini golf hole works its starts on the the first platform then goes through the loop to loop then comes out into the hole but we haven’t made a hole yet.

so this is our new cod for our windmill it will spin around 360   say okay  to slow things down to hit the ball through.   

 

 

 

this  is our  video of our course

this is  humming bird code for the vibration motor and the tri coloured  led.

 

 

 

 

 

 

 

this is the finishing product for our mini golf project

 

 

kite shape patters

this  kite shape is  made out of four kite shapes to make a 360 degree angle.

these pictures have different angels in them one them has 90 degrees two has 112.5 degrees one of them is 45 degrees. all of these angels all     combined together equals up to 360 degrees. it always has to equal up to 360 degrees.

 

 

Older posts Newer posts

© 2021 Hunter's Blog

Theme by Anders NorenUp ↑

Skip to toolbar