Shotlists and story
I did this clinic With Ms Williamson.
I did this clinic With Ms Williamson.
These are some rules about the audio booths and i did this clinic with Mr Galluccio.
This topic has 6 rules. the rule of thirds, balance elements, leading lines, view point, background,framing. All these rules when you take different photos will make it look better. I did this clinic with Ms Williamson
this is the the rule of thirds you line the object and it has to be in line with the lines.
In these next next few weeks we will be doing 10 to 11 film school clinics we all have to make a vlog for every clinic to pass and get a director hat. I did this clinic with Mr Galluccio.
This topic is about what to do when you on camera and what to do off the camera like breathing exercises and you always have to have you eye line to camera.
our class is still doing our 3D printing project but we a have switched our coding website to a non 3 demolition. we are now using a coding app called turtle art.
our first task was just to play around with it see what i does what all the buttons are
then our second task was to make the coolest design you can this is some of mine i made.
our first task was to make a polygon. i made a 12 sided polygon. on the right is the shape i made and on the left is the code as you can see the fist block is when flag clicked. then it start extruding means start drawing.
this was our second task we had to make a hexagon with holes in it. on the left side is my code and on the right side is my shape
for the next three weeks we are going to be pulling a part an object and up cycling it so we can use it for something again. this photo was the first part our project we had to write down objects around our school system then people in our school system like teacher and students. then we had to do interactions so what parts of the things interact together.
for the project this term i am going to pull apart a Ferrari this is bottom of and the top labelled parts and purposes of it.
this is the start of the pulling apart process this is when i just opened it up in this photo there is a mother board witch runs all the code. The cords coming off is connecting to the different parts in the car. the white box at the back gives power to the whole so it can drive.
this thing i found it hard to now what this was it was a little battery with cords connect to 2 wheels.
these screw came out of the car. some of the screws that were really hard to get out so i had to smash things so will get them open.
this is the the bottom of the car inside.
these things make the wheels spin.
this was inside the white box
this is whats left of the car inside and on top every thing is gone inside this is whats left from the outside.
this is the deign up cycling witch i am doing a party car witch has led lights in it and music playing
This is my design a single mini golf putting hole project. In this project we are using a Hummingbird circuit board and a EV3 robot. The course starts with a loop to loop obstacle, which then leads to a wind mill, goes through the windmill and comes out the other side towards the putting hole. The groups main goal is to create a single mini golf hole that utilises EV3 robot and hummingbird. The EV3 robot is used the for the windmill which will be using a motor to make it spin around. The hummingbird is for the loop to loop obstacle, where we will be using a vibration motor to make it vibrate through the pipe.
We started the construction today and completed the first stage out of four. The first stage is the base of the putting green where you hit off. The base was constructed using wood and nails and then we glued the fake grass on the top of the wood base. Stage two of the the construction we had to glue down the loop loop pipe to the base. The hardest part of the construction so far, has been trying to secure the pipe as its not very stable. That is all our construction so far, the next part of the construction is the wind mill and the putting hole at the end.
we have started our stage 3 construction. this is our start this morning. still more to build later today. this is our out come at the end of the day. so in this video it shows how our mini golf hole works its starts on the the first platform then goes through the loop to loop then comes out into the hole but we haven’t made a hole yet.
this is our video of our course
this is the finishing product for our mini golf project
this kite shape is made out of four kite shapes to make a 360 degree angle.
these pictures have different angels in them one them has 90 degrees two has 112.5 degrees one of them is 45 degrees. all of these angels all combined together equals up to 360 degrees. it always has to equal up to 360 degrees.