Pseudocode and Robot Build

 


Robotics

Session 1 28/4/2017

Today has already been a blast guess what we are starting today? We are starting to build robotics and today we are starting and are in progress of building robots and we got the robot that looks like this and we can download codes to make the robot do it and know how and what it is doing when it is moving. We are starting to get the robot into place. OMG we are nearly finished our robot and next session we are going to finish is so we can start coding the robot so it can do whatever we ask it to do such as turn left 90 degrees and much more.

Here is a video of what we did today:

 

Session 2 11/5/2017

Today we finished our Robot and we have attached everything onto it and we were very very stuck because we couldn’t find a piece that stop us from building. We all came back to the floor and discovered how to program the robot and I started to then we got a special cord witch goes in the robot and into the computer USB port.

Here is a video of the robot in progress…

 

Session 3  13/5/2017

Today was a fantastic day starting off with learning how to program the robot and what everything is about in and on the program and how to transfer the program to the robot.

Here is a photo of what everything means on the program….

The first green one is the practice one I made.

The red one is for the Data Operations.

The Orange one is for the flow control.

The yellow is for the sensors.

The blue one is for the advanced setting such as the stop button and much more.

The green one is for the action so the robot can move and turn.

    Challenges 

Session 1 23/5/17

Today in robotics we are still programing with the robot and there are 3 challenges that we have to complete and they are, but these challenges are just for this week and the we have our second challenges.

  • Seconds
  • Rotations
  • Degrees

Here is a video of what we did today…

 

Session 2 26/5/17

Today in design we did the seconds and degrees and finished them all off and we had to code the robot to go back wards and forwards. Now we have to do a new challenge that the aim is to go around a diamond…..

Here is a photo of what the seconds look like…

Here is a video of how to do the seconds, degrees and rotations….

Screen Recording Challenge 2 seconds, degrees and rotations-2bilrit

Here is a video of the Rotations….

 

Here is a video of the Degrees…..

 

Here is video of the Seconds….

 

Here is a video of the challenge for the square….

Session 3 6/6/17

Today in Robotics we tried out the square and to see if it works still but my program stops in the middle then starts again. When I try the program on the robot it does a weird turn for the 90* turn.

Here is a little video of what we did today….

Session 4 9/6/17

Today in Robotics we have learnt a new thing called sensors and we are focusing on the colour sensor and that is were it can stop on a colour we want. When we tried to do it we made it turn to much but it worked and it was trying to find the colour green.

Here is a video of it working…

 

IMG_5983-109elw5IMG_5983-109elw5

 Session 5 20 – 22/6/17

Today in Robotics we found out about the Touch sensor and the Ultrasonic sensor and the aim for the touch sensor is so if there is something in the way it will automatically bounce backs and to do that you have to use this special brick and in the video down below I will tell you what to do…

I still haven’t found out what the Ultrasonic sensor does because I haven’t explored it yet but here is what it looks like…

Session 6 – 26/7/17

What a start to term 3. This term we have been working on a program called the black line challenge and its where the robot has to follow the line or go zigzag.

Here is a video and photo of the black line challenge…

 

 

Leave a Reply

Your email address will not be published. Required fields are marked *