Beetle Blocks and Turtle Art

Hello this is my Beetle Blocks and Turtle Art blog!


Here is my heptagon I extruded the lines and I got this!

This block divides 360 into however many sides your shape has and it adds up to the angle that you need and makes the shape


The code didn’t load into this but I will explain I put four heptagons next to each other and changed the colours each time you do not need to do the colours.

So this is my rotational symmetry


I made a cool pattern and stacked it on top of each other I did this by using the change absolute block


I have experimented with x and y axis I have not worked it out yet but I will continue next session


Starting Turtle Art

I have tried to do what I did on beetle blocks with turtle art. I have not worked it our yet though. I have tried to divide 360 by seven to make a heptagon like what I did on beetle blocks.

I made this heptagon with another inside

I did it twice but changed the pen size and colour!

Here’s my rotational symmetry design

Here’s a different colour

Here is a new design. I basically just drew big lines and change the colours and the background.

Here’s another version of the other design I put on a black background

Here is another thing. It looks like a sun

By Kaleb Cooke 5C

Parts, Purposes and Complexities

Hi this is my project our first activity was Parts, People and Interactions

Here is my first scan:

Here is my diagram:

Here is me pulling my mouse apart

I have got to the circuit

I found out a lot of systems run this mouse and its hard to pull apart.

The car will be driving and another car will hit it the people in the car will scream and the car will have lights

We have a hummingbird now

We’re having trouble. The code is not working.

Its working I took out the forever block

We completed it and I had a great time with this project.

By Kaleb Cooke 5C


This is all about our Sphero coding. I’m with Jake and Adam. We first used block code but we are now doing JavaScript.

Here is my Sphero

Here is our code for the square.

This is our new code

more code

Here is a video of it

Here is the toss game

Here is some code

Here is the hot potato game

Starting java!

more java code

This error keeps coming up

By Kaleb 5C

Mini Golf

Hello this is my mini golf project with Adam and Jake. We are going to use the hummingbird to program the course


Here is a scan of my book:

I am explaining our mini golf hole:

And this is me working on it

We have planned for it to go down a ramp and then split off then after they merge again it will have 2 pipes a good and a bad we did have the idea for a big pipe that takes you to the start but we changed our minds.

We are starting to use the hummingbird

This is some of our code

Here are some problems we had:

Here is how we solved them

Here is us working


Grass, Sand, Pipes and Cardboard


Here is where we got the gear motor to work what Adam tries to explain is it is where the ball will spin and it will go in a random direction it will go to either of the pipes, out of bounds or back on the track.

we have some cardboard and we are going to make a beach house where the sand is which is off the track

taping it up


Making a roof

Changed the plan for the roof

We ditched the beach house idea. Planning how the ramp could look

This is our hummingbird so far

Made the ramp just need to paint

We are painting it

This is where we will cut.

Here I am working

We got our vibration motor to work

Here is the code for it. we had our humming bird in the first port and we set it to 1000 to make sure it really vibrates.

We also got our Tri LED to work

The code for it. The first one it is in port one red is set to 100 so it will turn red the others are set to 0. The second one it has a wait before it then it is set to green the wait makes a flashing affect where it goes red green red green etc.

This is our ramp now we are trying to put it together.

We have got our ramp ready and here is our course:

We have changed the plan.

This is my explanation of it:

We made the hole

We made a sand pit. The pipe will lead to it.

This one has no pipes in it.

this has pipes.

I made a update because we added the box with sand in it

We are planning where to put our gear motor

Working out where the gear motor will go

This is our hummingbird

A windmill.

Our finished project

Here was our code


I have had a fantastic time on our mini golf project. It has been a great experiment and an amazing experience. I would 100% do it again I have had awesome people also helping with our project I have had a great time. The windmill was hard but we made it! I am so happy with how it turned out. a great project and a great time!!!

By Kaleb 5C


Hello this is my post for Hummingbird.


The Dr Seuss Hummingbird Challenge

What type of creature might you create?

What variables might you consider?


  • Can your creature move? How? When? How much? How fast?
  • Does it make a sound? What sound? When? For how long?
  • What does it look like? Does it change colours? When?


My initial goal is to create Jight Wolb in a Light Bulb that uses hummingbird to make a great, fun and amazing experience!


Here are the parts, purposes and complexities of my design:

This is the first iteration of my creatures system:

The parts which were the most challenging was trying to code the LEDs and motors to work. This screencast wouldn’t work but basically I was saying that my vibration motor would work and then it wouldn’t. It was not consistent


I was able to get these working by making it so It just vibrates all the time instead of just when you touch it



The second iteration of my creature’s system is so I will change it so I will take the sensor out



Here are the parts, purposes and complexities of the additions to my design:



This is the second iteration of my creature’s system:


Here’s a screen snip of my code. The code was challenging because again it was not consistent but it worked out well. I also changed it to tri coloured LED


I was able to get these working by getting help from a friend that had done it and also keeping the code on when it worked so I wouldn’t have to try again.


This is a short film of my learning journey throughout this project:

Lego EV3

Hello I am Kaleb this is my lego EV3 project with Hamish and Jake. We made a robot claw and a car!


starting planning!

working on the claw!

getting things ready to put on the claw

i’m working on some building

coming along well!

Look how good he looks!

It works!

Also we made a car here it is.

here is the car!

here’s it finished



starting my code!

I am coding to make the car move


I have had a great time doing this LEGO EV3 machine I cannot wait to hopefully do this again in the future. I may not of done the best project but at least i made something! I would do this again for sure.


By Kaleb Cooke 5C

Interactive australia map project

What this is about

In this project I am going to make a interactive map of Australia. So when you press on a state it will say about that state. I am trying to teach people about the great country of Australia.


smallest continent

7th biggest country

scott morrison is the prime minister

25.1 million people

its the only continent that consists of one country excluding antartica

it is an island



new south wales

south australia

western Australia


northern territory

Australian capital territory




I have started planing in my book


I have written about the states


I have connected the makey makey to my project



i am making progress!!!


I am basically done


24/05/2019- reflection

I have learned how to program a makey makey properly. I am now planning on using it some time in the future I have also learnt more about all the amazing capabilities of scratch and I WILL use scratch a lot more (not playing games I mean doing work) so yeah I have really enjoyed this experience. We have had our fair share of problems including realising the makey makey did not have enough cables to do all the states but we found a solution we just put multiple states on the one bit of code. I think we have well considering a lot of people might find this hard and yes it was hard but we had got the hang of it after only FIVE weeks! I think if we did this again we would be experts! I have had a great time on Makey Makey and scratch hopefully we can use these great programs again.